forum.vdsworld.com

Aslan · Posted: Thu Mar 17, 2005 3:38 pm Post subject:

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Network Connection
Physical Address. . . . . . . . . : 00-0C-F1-73-72-A4
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 137.14.102.3
Subnet Mask . . . . . . . . . . . : 255.255.248.0
Default Gateway . . . . . . . . . : 137.14.96.1
DNS Servers . . . . . . . . . . . : 137.14.96.4
137.14.96.13
Primary WINS Server . . . . . . . : 137.14.96.21
Secondary WINS Server . . . . . . : 137.14.5.36

Dr. Dread · Posted: Sat Mar 19, 2005 7:51 am Post subject:

Hmmm. What do you get from the AdaptersInfo function?
The last two values there are Gateway and DHCP.

Perhaps also check if other values (IP, DNS, WINS, MAC) are correctly output from the DLL.

Greetz
Dread

Aslan · Posted: Mon Mar 21, 2005 10:07 pm Post subject:

Ok, AdaptersInfo gives me the correct Gateway.
DHCP is still 255.255.255.255 this may be because I have a static address therefore not using DHCP. It does show DHCP eneabled = 0